Hirschmann RSP 20 User Manual

Installation RSP 20/25/30/35
Release 08 08/2014
9
 Housing
Only technicians authorized by the manufacturer are permitted to open
the housing.
 Never insert pointed objects (narrow screwdrivers, wires, etc.) into the
device or into the connection terminals for electric conductors. Do not
touch the connection terminals.
 Keep the ventilation slits free to ensure good air circulation.
 Install the device in the vertical position.
 At ambient temperatures > 140 °F (60 °C):
The surfaces of the device housing may become hot. Avoid touching
the device while it is operating.
 CE marking
The labeled devices comply with the regulations contained in the following
European directive(s):
In accordance with the above-named EU directive(s), the EU conformity
declaration will be at the disposal of the relevant authorities at the
following address:
Hirschmann Automation and Control GmbH
Stuttgarter Str. 45-51
72654 Neckartenzlingen
Germany
Tel.: +49 1805 141538
The product can be used in the industrial sector.
 Interference immunity: EN 61000-6-2
 Emitted interference: EN 55022
 Reliability: EN 60950-1
You find more information on technical and industry standards here:
“Technical data” on page 40
Device variant Directive
All variants 2004/108/EC (EMC)
Directive of the European Parliament and the council for stan-
dardizing the regulations of member states with regard to elec-
tromagnetic compatibility.
2011/65/EU (RoHS)
Directive of the European Parliament and of the Council on the
restriction of the use of certain hazardous substances in elec-
trical and electronic equipment.
Only for device variants
featuring working voltage with
the characteristic value K9 or
KK:
2006/95/EC
Directive of the European Parliament and the council for stan-
dardizing the regulations of member states with regard to elec-
trical equipment to be used within specific voltage ranges.

Hirschmann RSP 20 Specifications

General

Brand	Hirschmann
Model	RSP 20
Category	Switch
Language	English