2. SETUP
2-23
7. The Update Driver Software window appears. Click Browse my computer for driver
software.
8. Click Let me pick from a list of device drivers on my computer.
9. Select a new driver you want to update, and then click Next.
<To use a port as Ethernet (TCP/IP)>
Select Intel(R) 210 Gigabit Network Connection, and then click Next.
Note: If the OS is Windows® 10, two [Intel (R) 210 Gigabit Network Connection] are
displayed, select the upper side.
<To use a port as EtherCAT>
Select CoDeSys EtherExpress GBit PCI Ethernet Adapter, and then click Next.
10. A message is displayed to indicate that the driver has been successfully updated. Confirm
the message, and then click Close.
This completes the installation of the driver. Restart the HF-W100E/IoT.
To Next Page
