1. LENS SHIFT
Adjust the projected image position.
2. LED Indicator
3. Infrared receiver
4. Zoom
Zoom in or zoom out the projected image
5. Speaker
6. Focus
Adjust the projected image’s focus.
7. LENS RELEASE
8. Adjustable foot
Adjust the height and angle of the projector
with the adjustable foot.
9. Ventilation inlet
The internal cooling fan draws cool
air from the ventilation inlet into the
projector.
10. Ventilation outlet
The hot air generated inside the projector
is dispersed through the ventilation slot.
Make sure the ventilation slot is free from
obstruction.
11. Lens
1. POWER (LED)
The indicator that shows the projector's
power status.
2. LIGHT (LED)
The indicator that shows the projector is
on or off.
3. TEMP. (LED)
The indicator that shows the projector's
error message.
4. FAN (LED)
The indicator that shows the projector's fan
error message.