Hitachi LP-WU6600 - USB POWER (5 V;1.5 A) Connection

Projector installation
38
USB POWER (5V/1.5A) connection
Connect a USB cable for USB host. Support 5V/1.5A output as long as the projector power on.
Connect a USB cable for USB host.
3D SYNC (5V) connection
• IN: Connect 3D-sync in cable from a computer or an enabled device.
• OUT: Connect 3D IR glasses receiver unit.
IN: Connect 3D-sync in cable from a computer or an enabled device.
OUT: Connect to 3D IR glasses receiver unit.