OSD description
70
7. Press MENU on the projector.
8. Select MENU Settings 2 Advanced 1 Network.
9. After getting into Network, input the following:
DHCP: Off
IP Address: 10.10.10.10
Subnet Mask: 255.255.255.0
Gateway: 0.0.0.0
DNS Server: 0.0.0.0
10. Press ENTER / ► to conrm settings.
Open a web browser.
(for example, Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher).
11. In the Address bar, input the IP address: 10.10.10.10.
12. Press ENTER / ►.
The projector is setup for remote management. The LAN/RJ45 function displays as follows.
To Next Page
Loading...
