Hitachi LP-WU6600 - Configuring Email Alerts; RS232 via Telnet Communication

OSD description
73
4. For Sending alert mail, input the following:
The SMTP eld is the mail server for sending out email (SMTP protocol). This is a required
eld.
The To eld is the recipient’s email address (for example, the projector administrator). This is a
required eld.
The Cc eld sends a carbon copy of the alert to the specied email address. This is an optional
eld (for example, the projector administrator’s assistant).
The From eld is the sender’s email address (for example, the projector administrator). This is a
required eld.
Select the alert conditions by checking the desired boxes.
Note: Fill in all elds as specied. User can click Send Test Mail to test what setting is correct.
For successful sending an e-mail alert, you must select alert conditions and enter a correct
e-mail address.
RS232 by telnet function
Besides projector connected to RS232 interface with “Hyper-Terminal” communication by
dedicated RS232 command control, there is alternative RS232 command control way, so called
“RS232 by TELNET” for LAN/RJ45 interface.
Specsheet for “RS232 by TELNET”:
1. Telnet: TCP
2. Telnet port: 23
(for more detail, kindly please get contact with the service agent or team)