Hitachi VSP F1500

Figure 3-6 Relation among user, command devices, and resource groups
Table 3-4 Relation between resource groups and command devices
Login
user
Command
device
Operating range Reference
Configuration
change
Command
operations
using the
out-of-
band
method
System
administra
tor
CM0 Can operate all resource
groups after logging in.
Operable Operable Operable
CM10 Can operate only in the
range of resource group 10,
and the shared ports after
logging in.
Operable Operable Inoperable
CM11 Can operate only in the
range of resource group 11,
and the shared ports after
logging in.
Operable Operable Inoperable
CM20 Can operate only in the
range of resource group 20,
Operable Operable Inoperable
3-22
CCI functions
Command Control Interface User and Reference Guide