Hitachi VSP F1500 - Page 339

Error
code
Error
message
Condition Recommended action
Returne
d Value
2. Find the configuration definition
file in which the name of the
consistency group to which the pair
is added is written at dev_group.
3. Add the device to the dev_group
in the configuration definition file
found at step 2 which matches the
consistency group to which the pair
is added (add P-VOL and S-VOL
which configures the pair to be
added).
4. Restart the HORCM instance
which matches the configuration
definition file found at step 2,
reflecting the editing results of the
configuration definition file.
5. Execute the paircreate
command specifying the dev_group
name of the consistency group to
which the pair is added by the
HORCM instance which matches the
configuration definition file found at
step 2 as follows.
In case of TC, UR, or GAD:
paircreate -g <dev_group name>
-f[g] <fence> [CTGID]
In case of SI:
paircreate -g <dev_group name>
-m grp [CTGID]
Confirm the CTG ID of the existing
consistency group by pairvolchk
command.
When the -fg option is specified
and CTGID is omitted in the
paircreate command, unused CTG
ID is set automatically.
EX_EXTC
TG
Extended
CT group
across
RAIDs
A TrueCopy, Universal
Replicator, global-active
device, or ShadowImage
volume is defined in the
configuration definition file
(HORCM_CONF) as a group
that extends across storage
systems.
Please confirm the serial # of the
volumes by using the pairdisplay
command to verify that the consistency
group is contained completely within
one RAID storage system.
216
EX_ENXC
TG
No CT
groups
left for
OPEN Vol
use.
An available consistency
group for OPEN Volume does
not exist.
Please confirm whether all consistency
groups are already used by mainframe
volumes.
215
Troubleshooting
9-15
Command Control Interface User and Reference Guide