Hitachi VSP F1500 - Page 351

raidcom add external_grp
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
Get Command
Status
Async 2E11 4106 The specified external LU cannot create a external
volume because the transition of data is required.
Get Command
Status
Async 2E11 4200 The specified path group cannot be operated
because a path between other devices exists.
Get Command
Status
Async 2E11 800F The operation cannot be performed because the
unsupported microcode version exists in the
system.
CMDRJE Executing 2E11 8010 The storage system is in internal process, or the
configuration changing processes are conflicting.
CMDRJE Executing 2E11 9400 The command cannot be accepted. After a while,
execute the same command.
Get Command
Status
Async 2E20 4102 Package for Mainframe is required when you
specify the emulation type of mainframe.
Get Command
Status
Async 2E20 8300 The specified MP Blade is not installed.
CMDRJE Executing 2E20 8401 The specified virtual port is not defined.
CMDRJE
Get Command
Status
Executing/
Async
2E21 9008 The program product of Universal Volume Manager
is not installed.
CMDRJE
Get Command
Status
Executing/
Async
2E21 9013 The program product of nondisruptive migration is
not installed.
Get Command
Status
Async 2E22 4100 The external volume group exists already.
CMDRJE Executing 2E22 4100 The external volume group exists already.
Get Command
Status
Async 2E23 4102 Exceeded the number of mapping that can be set
per 1 port.
Get Command
Status
Async 2E23 4303 The operation cannot be performed because the
number of path in the path group exceeds 8.
Get Command
Status
Async 2E30 4119 The external volume cannot be added because the
number of virtual volumes that can be created in
the system exceeded the maximum number.
Get Command
Status
Async 2E30 411B The external volume having the Data Direct
Mapping attribute cannot be created because the
size of the specified external LU is less than 8GB.
Get Command
Status
Async 2E30 4201 The specified external LU has mapped already.
CMDRJE Executing 2E30 8400 The port attribute is not External.
CMDRJE Executing 2E30 840E The command cannot be executed with the
specified port attribute.
Troubleshooting
9-27
Command Control Interface User and Reference Guide