Hitachi VSP F1500 - Page 352

raidcom add external_grp
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
Get Command
Status
Async 2E31 4000 The specified external storage LU is the device of
not supported.
Get Command
Status
Async 2E31 4001 The specified external storage system is not
supported.
Get Command
Status
Async 2E31 4002 The specified external volume does not support
nondisruptive migration.
Get Command
Status
Async 2E31 9000 The usage capacity exceeds the license capacity of
the program product.
CMDRJE Executing 2EDA 00EE The command cannot be accepted. After a while,
execute the same command.
Get Command
Status
Async 2EDA 41FA An internal error occurred.
CMDRJE Executing 2EF3 4102 The specified parameter is invalid. Check the
Command Control Interface Command Reference.
CMDRJE Executing B980 B901 The command was rejected because the specified
port is for NAS Platform (System LU).
CMDRJE Executing B980 B902 The command was rejected because the selected
port is for NAS Platform (User LU).
Table 9-11 SSB codes returned by raidcom check_ext_storage external_grp
raidcom check_ext_storage external_grp
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 4100 The external volume group is not in the effective
range.
CMDRJE Executing 2E10 4301 The specified external volume has already
disconnected the path, or is in the process of
checking path.
CMDRJE Executing 2E11 001B The target LDEV is blocked.
CMDRJE Executing 2E11 4000 The path for the specified external path is in the
state of disconnected.
CMDRJE Executing 2E11 4302 All the paths for the specified external path are
blocked.
CMDRJE Executing 2E20 4100 There is no external volume group.
CMDRJE Executing 2E20 4300 There is no external path.
CMDRJE Executing 2E30 001E Online from the mainframe host.
Get Command
Status
Async 2EDA 0905 An internal error occurred by the operation of
external path.
9-28
Troubleshooting
Command Control Interface User and Reference Guide