Hitachi VSP F1500 - Page 353

raidcom check_ext_storage external_grp
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
Call Hitachi Data Systems customer support.
CMDRJE Executing 2EDA 0905 An internal error occurred by the operation of
external volume.
Call Hitachi Data Systems customer support.
Table 9-12 SSB codes returned by raidcom delete external_grp
raidcom delete external_grp
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 4100 The external volume group # is in the effective
range.
Get Command
Status
Async 2E10 0012 LDEVs in the external volume group are devices
that have a CC/XRC attributes.
CMDRJE Executing 2E11 0153 The specified external volume group is used in
another operation.
Get Command
Status
Async 2E11 4103 Destage is not executed.
Get Command
Status
Async 2E11 4104 The external volume is used as Compatible
FlashCopy® V2.
Get Command
Status
Async 2E11 4105 The specified external volume cannot be deleted
because audit logs for the system disk are being
used.
Get Command
Status
Async 2E11 8004 The operation cannot be performed because the
internal processing is in progress.
CMDRJE Executing 2E11 8010 The storage system is in internal process, or the
configuration changing processes are conflicting.
Get Command
Status
Async 2E11 8108 The operation cannot be performed because there
is blocked part in the system.
CMDRJE Executing 2E11 9400 The command cannot be accepted. After a while,
execute the same command.
CMDRJE Executing 2E20 4100 There is no external volume group.
CMDRJE Executing 2E30 0007 LU path is defined to LDEV in the external volume
group.
Get Command
Status
Async 2E30 0057 The external volume is used as a system disk.
Get Command
Status
Async 2E30 4101 The external volume is used as LUSE.
Troubleshooting
9-29
Command Control Interface User and Reference Guide