Hitachi VSP F1500 - Page 514

raidcom modify license
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2EC2 010C Data Retention Utility cannot be deleted because
secondary volume rejection or reservation settings
remain.
CMDRJE Executing 2EC2 010D The specified program product is not supported.
CMDRJE Executing 2EC2 0205 The program product was removed because the
Term license had expired.
CMDRJE Executing 2EC2 0206 The status of the specified license is already
changed or incorrect.
CMDRJE Executing 2EC2 0503 The specified operation cannot be performed
because the key type is incorrect.
CMDRJE Executing 2EC2 050C The current DKCMAIN firmware version cannot
enable or disable the program product.
Table 9-155 SSB codes returned by raidcom initialize pool
raidcom initialize pool
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 6000 The value of the specified ID is out of range.
Get Command
Status
Async 2E10 0001 The volume defined in specified pool is used as a
TrueCopy pair.
Get Command
Status
Async 2E10 0002 The volume defined in specified pool is used as a
Universal Replicator pair.
Get Command
Status
Async 2E10 0004 The volume defined in specified pool is used as a
Thin Image pair.
Get Command
Status
Async 2E10 0005 The volume defined in specified pool is used as a
Volume Migration volume.
Get Command
Status
Async 2E10 0213 The volume defined in specified pool is used as a
global-active device (GAD) pair.
Get Command
Status
Async 2E10 0216 The volume defined in specified pool is used as a
ShadowImage pair.
Get Command
Status
Async 2E10 600B The specified pool is blocked.
Get Command
Status
Async 2E10 600D The specified pool is shrinking.
Get Command
Status
Async 2E10 6020 The specified pool is in deduplication disabled.
Get Command
Status
Async 2E10 6023 The specified pool is being created or expanded.
9-190
Troubleshooting
Command Control Interface User and Reference Guide