EasyManua.ls Logo

Hitachi VSP F1500

Hitachi VSP F1500
530 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
raidcom delete parity_grp
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
Get Command
Status
Async 2E30 004E The specified parity group contains a Data
Retention Utility/Volume Retention Manager
attribute device.
Get Command
Status
Async 2E30 0060 The LDEV in the specified parity group is used as a
command device that is used in the extended
consistency group.
Get Command
Status
Async 2E30 0095 The specified parity group cannot be deleted
because it contains the remote command device
which is used for the mirror of the journal group.
CMDRJE
Get Command
Status
Executing/
Async
2EC4 FEEC An internal error occurred. Contact Hitachi Data
Systems customer support.
Table 9-158 SSB codes returned by raidcom modify drive command (VSP Gx00 models
and VSP Fx00 models)
raidcom modify drive command
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 8500 The specified drive box or drive is not correct.
Get Command
Status
Async 2E10 8003 The specified operation cannot be performed
because the storage system is being turned off.
Get Command
Status
Async 2E10 8500 The specified operation cannot be performed
because the drive copy is in process.
Get Command
Status
Async 2E10 8501 The specified operation cannot be performed
because the drive is blocked.
Get Command
Status
Async 2E10 8502 The spare drive cannot be set because the number
of spare drives that can be set reaches the
maximum number.
Get Command
Status
Async 2E10 8503 The specified drive is already used.
Get Command
Status
Async 2E02 8504 The specified drive is not a spare drive.
Get Command
Status
Async 2E11 0001 The specified operation cannot be performed
because the LDEV is being verified.
Get Command
Status
Async 2E11 0056 The specified operation cannot be performed
because data in the cache is corrupted.
Get Command
Status
Async 2E11 0057 The specified operation cannot be performed
because the LDEV is under format, shredding, or
quick format.
9-196
Troubleshooting
Command Control Interface User and Reference Guide

Table of Contents

Related product manuals