Hitachi VSP F1500

raidcom delete parity_grp
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
Get Command
Status
Async 2E11 8012 The specified operation cannot be performed
because the power condition of the drive box is
abnormal.
Get Command
Status
Async 2E11 8013 The specified operation cannot be performed
because storage system is in process.
Get Command
Status
Async 2E11 8102 The specified operation cannot be performed
because cache memory is blocked.
Get Command
Status
Async 2E11 810A The specified operation cannot be performed
because the cache status is abnormal.
Get Command
Status
Async 2E11 8200 The specified operation cannot be performed
because the MP unit is being transferred.
Get Command
Status
Async 2E11 8201 The specified operation cannot be performed
because the MP unit is blocked.
Get Command
Status
Async 2E11 8301 The specified operation cannot be performed
because DKB is being transferred.
Get Command
Status
Async 2E11 8302 The specified operation cannot be performed
because CHB is being transferred.
Get Command
Status
Async 2E11 8311 The specified operation cannot be performed
because DKB is blocked.
Get Command
Status
Async 2E11 8312 The specified operation cannot be performed
because CHB is blocked.
Get Command
Status
Async 2E11 8400 The specified operation cannot be performed
because the port is blocked.
Get Command
Status
Async 2E11 9400 The command cannot be accepted. After a while,
execute the same command.
Get Command
Status
Async 2E11 9A00 The encryption key cannot be obtained from the
key management server.
Get Command
Status
Async 2E11 9A01 The specified operation cannot be performed
because the unused encryption keys have run out.
Get Command
Status
Async 2E20 0100 The parity group is not found.
Get Command
Status
Async 2E30 0007 The specified parity group contains LDEVs for
which LU path is already defined.
Get Command
Status
Async 2E30 000E The operation failed because the specified parity
group contains a pool volume of Dynamic
Provisioning.
Get Command
Status
Async 2E30 000F The specified parity group contains an LDEV which
is already used as a journal volume or a data
volume.
Troubleshooting
9-195
Command Control Interface User and Reference Guide