Hitachi VSP F1500 - Page 518

raidcom delete parity_grp
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
Get Command
Status
Async 2E10 0000 The specified parity group contains LDEVs used by
another program product.
Get Command
Status
Async 2E10 0001 The specified parity group contains an LDEV used
as a TrueCopy or Universal Replicator pair.
Get Command
Status
Async 2E10 0062 The specified parity group contains an LDEV used
as the P-VOL of a GAD pair.
Get Command
Status
Async 2E10 0063 The specified parity group contains an LDEV used
as the S-VOL of a GAD pair.
Get Command
Status
Async 2E02 0100 The specified operation cannot be performed
because the encryption value of the key number
that is set to encryption ECC is invalid.
Get Command
Status
Async 2E10 0101 The specified operation cannot be performed
because the checksum of the encryption key is not
coincident.
Get Command
Status
Async 2E10 8003 The specified operation cannot be performed
because the storage system is being turned off.
Get Command
Status
Async 2E10 8500 The specified operation cannot be performed
because the drive copy is in process.
Get Command
Status
Async 2E10 8501 The specified operation cannot be performed
because the drive is blocked.
Get Command
Status
Async 2E11 0001 The specified operation cannot be performed
because the LDEV is being verified.
Get Command
Status
Async 2E11 0056 The specified operation cannot be performed
because data in the cache is corrupted.
Get Command
Status
Async 2E11 0057 The specified operation cannot be performed
because the LDEV is under format, shredding, or
quick format.
Get Command
Status
Async 2E11 0056 The specified operation cannot be performed
because data in the cache is corrupted.
Get Command
Status
Async 2E11 0057 The specified operation cannot be performed
because the LDEV is under format, shredding, or
quick format.
Get Command
Status
Async 2E11 0058 The specified operation cannot be performed
because the specified parity group is using a spare
drive.
Get Command
Status
Async 2E11 2206 You do not have the operation authority to operate
the target resource group. Specify the resource
group that is allocated to the user group as the
operation target, or set the operation authority to
the user group in order to operate the target
resource group.
9-194
Troubleshooting
Command Control Interface User and Reference Guide