Hitachi VSP F1500 - Page 517

raidcom add parity_grp
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
Get Command
Status
Async 2E11 810A The specified operation cannot be performed
because the cache status is abnormal.
Get Command
Status
Async 2E11 8200 The specified operation cannot be performed
because the MP unit is being transferred.
Get Command
Status
Async 2E11 8201 The specified operation cannot be performed
because the MP unit is blocked.
Get Command
Status
Async 2E11 8301 The specified operation cannot be performed
because DKB is being transferred.
Get Command
Status
Async 2E11 8302 The specified operation cannot be performed
because CHB is being transferred.
Get Command
Status
Async 2E11 8311 The specified operation cannot be performed
because DKB is blocked.
Get Command
Status
Async 2E11 8312 The specified operation cannot be performed
because CHB is blocked.
Get Command
Status
Async 2E11 8400 The specified operation cannot be performed
because the port is blocked.
Get Command
Status
Async 2E11 9400 The command cannot be accepted. After a while,
execute the same command.
Get Command
Status
Async 2E11 9A00 The encryption key cannot be obtained from the
key management server.
Get Command
Status
Async 2E11 9A01 The specified operation cannot be performed
because the unused encryption keys have run out.
Get Command
Status
Async 2E20 7001 The specified CLPR is not installed.
Get Command
Status
Async 2E20 8501 The specified drive is not installed.
CMDRJE
Get Command
Status
Executing/
Async
2EC4 FEEC An internal error occurred. Contact Hitachi Data
Systems customer support.
Table 9-157 SSB codes returned by raidcom delete parity_grp (VSP Gx00 models and
VSP Fx00 models)
raidcom delete parity_grp
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE
Get Command
Status
Executing/
Async
2E00 0101 The parity group number is not within the valid
range.
Troubleshooting
9-193
Command Control Interface User and Reference Guide