Hitachi VSP F1500 - Page 516

raidcom add parity_grp
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
Get Command
Status
Async 2E02 0101 A parity group in which encryption and accelerated
compression are enabled cannot be created.
Get Command
Status
Async 2E02 8501 The specified drive has different drive type codes.
Get Command
Status
Async 2E10 0109 The parity group cannot be created because the
parity group which is specified to be combined
contains parity groups that do not support
accelerated compression.
Get Command
Status
Async 2E10 010A The specified operation cannot be performed
because the parity group does not support
accelerated compression.
Get Command
Status
Async 2E10 8003 The specified operation cannot be performed
because the storage system is being turned off.
Get Command
Status
Async 2E10 8500 The specified operation cannot be performed
because the drive copy is in process.
Get Command
Status
Async 2E10 8501 The specified operation cannot be performed
because the drive is blocked.
Get Command
Status
Async 2E10 8503 The specified drive is already used.
Get Command
Status
Async 2E10 8505 The parity group cannot be created because some
of the specified drives do not support accelerated
compression.
Get Command
Status
Async 2E10 8506 The specified operation cannot be performed
because the drive’s firmware version does not
support accelerated compression.
Get Command
Status
Async 2E11 0001 The specified operation cannot be performed
because the LDEV is being verified.
Get Command
Status
Async 2E11 0056 The specified operation cannot be performed
because data in the cache is corrupted.
Get Command
Status
Async 2E11 0057 The specified operation cannot be performed
because the LDEV is under format, shredding, or
quick format.
Get Command
Status
Async 2E11 0109 The entered parity group ID is already used.
Get Command
Status
Async 2E11 8012 The specified operation cannot be performed
because the power condition of the drive box is
abnormal.
Get Command
Status
Async 2E11 8013 The specified operation cannot be performed
because storage system is in process.
Get Command
Status
Async 2E11 8102 The specified operation cannot be performed
because cache memory is blocked.
9-192
Troubleshooting
Command Control Interface User and Reference Guide