Daily Maintenance and Cleaning
Maintenance and after-sales
Do not immerse the display in water or use water spray to clean the display. Please use
a soft cloth moistened with clean water when cleaning. Do not wipe with any detergent.
Disposal
Maintenance Contact information
Thank you for choosing HITWAY, We provide warranty and lifetime after-sales support
for our HITWAY products.lf you have any questions, please contact our after-sales
support team. We will provide you with technical support and suitable solutions as soon
as possible.
Precautions
1. Before plugging or unplugging the display, please be sure to turn off the power first, because live
operation will cause permanent electrical damage to the display;
2. When assembling the display, please ensure that the torque value of the reinforced hexagon
socket head screw does not exceed 1Nm at most, because excessive torque will cause damage to
the instrument structure;
3.Do not soak the display in water;
4. When cleaning the display, you can use a soft cloth dipped in water to wipe the surface,but do
not use any detergent or spray liquid on the surface;
5. When discarding, please abide by local laws and regulations, discard or recycle in an environ-
mentally friendly way, and do not discard the instrument or any accessories as residents' garbage;
6. Display damage and failure caused by incorrect assembly or unauthorized change of parameter
values are not covered by the after-sales warranty.
· Dispose of the bicycle and its components, such as the battery and the electric and
electronic components, in accordance with the local legal regulations and guidelines,
e.g. via a recycling centre.
· Follow the instructions of the battery manufacturer and the manufacturer of the
electrical and electronic components.
To dispose of the bicycle at the end of its lifetime, proceed as follows:
Deutsch / English / Français / Español / Italiano / Nederlands / Polski
-69-
To Next Page
Loading...
