EQUIPMENT INSTALLATION
18
4.2.6 Clear Headset Registration
On the HEADSET REGISTRATION display, pressing the Clear
inactive button will unregister only headsets that are turned off.
Pressing the Clear all button will unregister all headsets that are
registered to the base station. The base station will automatically
restart.
IMPORTANT: If the Clear All option is selected, NO headsets will
operate until they are re-registered. It is best NOT to use this option
during store business hours.
If you experience difculties registering headsets: In the USA,
call HME Technical Support at 1-800-848-4468. Outside the USA,
call your local HME representative for assistance.
To Next Page
Loading...