BASE STATION SETTINGS
74
4. Conrmation of the current activation and level is
displayed on the IN/OUTBOUND VOLUME display.
2. Ceiling Speaker Volume
3. Line In/Out
4. Vehicle Tone in Headset
To raise and lower the volume levels heard from the ceiling
speaker, select Ceiling speaker from the VOLUME MENU
and then on the IN/OUTBOUND VOLUME display, select
which volume you would like to adjust and use the + and
− buttons.
If a volume is set to 0, that function turns off.
To save these settings, press the Back button.
To raise or lower the volume level to or from any device
connected to the base station line output, select Line In
or Line Out on the LINE IN/OUT VOLUME display and
then use the + and – buttons.
To save these settings, press the Back button.
The VEHICLE TONE VOLUME setting only adjusts the
level of alert tones heard in the headsets.
To raise and lower the volume level of alert tones, use the
+ and – buttons.
To save these settings, press the Back button.
To Next Page
Loading...