HMS Netbiter EasyConnect Series - Netbiter EC150

Local Configuration 38
Doc: HMSI-168-92 Rev: 3.00Netbiter EasyConnect Gateway User Manual
9.3 Netbiter EC150
9.3.1 Login
EntertheIPaddressofthegatewayinawebbrowsertologin.Thedefaultusernameis
admin,andthepasswordistheactivationcodesuppliedwiththeunit.
Theonlychangesthatshouldbemadelocallyarethesettingsforthenetworkconnection
and/orfirmwareupdates.All
othersettingsareprovidedfortroubleshootingandinforma‐
tionalpurposesonly.Changesmadetotheseothersettings willnotbesynchronizedwith
NetbiterArgos.
9.3.2 Ethernet Settings
WhenDHCPaddressingisenabledtheunitwillautomaticallyreceivethesettingsforIP
address,subnetmask,defaultgateway,andDNS.IfnotusingDHCP,thesesettingsmust
beenteredmanually.Contactyournetworkadministratorifindoubt.