HMS Netbiter EasyConnect Series - Firmware Update; Using Netbiter Update (EC150;250)

Doc: HMSI-168-92 Rev: 3.00Netbiter EasyConnect Gateway User Manual
Firmware Update 48
10. Firmware Update
Alternative Methods
TheeasiestwaytoperformafirmwareupdateisfromtheNetbiterArgoswebpages.Please
refertotheNetbiterArgosUserManualforinstructions.
IfNetbiterArgoscannotbeused,thefirmwareupdatecanalsobecarriedoutviathelocal
configurationwebpages.See“LocalConfiguration”onpage
37.
Ifnoneoftheabovemethodscanbeused,itisalsopossibletoupdatethefirmwarein
EC150andEC250viaaconnectiontoalocalPCusingthefreetoolNetbiterUpdate.
10.1 Using Netbiter Update (EC150/250)
Requirements
•Null‐modemcable
•PCwithCOMport
1. DownloadNetbiterUpdatefromwww.netbiter.com/support
toyourPC.
2. Connectanull‐modemcablebetweentheCOMportonyourPCandthe9‐pinD‐sub
connectorontheNetbitergateway.
3. StartNetbiterUpdate.
COMPortshouldalreadybeselected.LeavetheBaudratesettingatAuto.