Hobart UX Series - Priming the Suction Hoses; Priming of Suction Hose Rinse Agent

12 AG-21213-F-09-09
DE
GB
F
NL
SETTINGS
6.4 PRIMING THE SUCTION HOSES
(only with built in detergent pump)
To prime the detergent suction hose between the injector and container:
– Close door
The temperature indicator Rinse
Å
displays:
"SF1" = Priming of detergent suction hose.
– Push and hold Start button
Á
for approx. 1 minute.
6.5 PRIMING OF SUCTION HOSE RINSE AID
To prime the rinse aid suction hose between the injector and
container:
– Push Program button
Ã
again.
The temperature indicator Rinse
Å
displays:
"SF2"= Priming of rinse aid suction hose.
– Push Start button
Á
and hold for approx. 3 minutes.
If using a longer suction hose, hold the Start button
Á
for about 6 minutes.