AG-21213-F-09-09 7
DE
GB
F
NL
3 CONNECTING OF DETERGENT PUMP
If the machine is not equipped with a detergent pump, installation of an
external dispenser must be done as follows.
Must be carried out by an authorized technician according
to the local and national codes.
– Tank must be drained.
– Switch off main switch or unplug.
– Remove front panel.
– Lift up control box and swing it to front.
To connect a liquid detergent dispenser:
– Remove blanking plug (A).
– Install detergent inlet fitting + gasket (B).
– Connect a hose (PVC / 6mm outside Ø x 4mm inside Ø) between outlet
of the detergent pump and the detergent inlet (B) of the wash tank.
Tighten with hose clamp.
– Install detergent pump or mount externally.
A
B
B
To Next Page
Loading...
