Hobart UX Series - Operating the Machine; Pre-Operation Preparation; Running a Wash Cycle

AG-21213-F-09-09 13
DE
GB
F
NL
7.1 PREPARATION
– Check correct position of wash/rinse arms and strainers.
– Open shut-off valve.
– Switch on main switch or put the plug in.
– Check level of detergent and rinse aid containers.
– Close door and push the ON button
À
, tank will be filled.
– The Start button
Á
illuminates red during fill and heating
cycle. This process can take several minutes.
When the Start button changes to green light, machine
is ready for operation.
– Remove coarse food debris.
– Avoid soiling by foam producing substances (albumins etc.).
– Insert baking sheets into the appropriate rack.
– Put pots and pans face downwards into the racks.
– Protect light washware by putting on a rack.
7 OPERATION