14 AG-21213-F-09-09
DE
GB
F
NL
OPERATION
7.2 RUN
– Put rack into the machine and close door.
– Push the Start button
Á
. As long as the wash cycle is running, the
Start button illuminates blue.
– As soon as the Start button changes to green, the wash cycle is fini-
shed.
– Machines with optional exhaust heat recovery: The Start button flashes
green as long as the steam is exhausted.
– Open door and take out rack.
Allow washware to dry for approx 1 minute.
– Select program:
The machine operates automatically in the standard program. If need-
ed, it is possible to select a shorter or longer program.
To show the present program, push Program button
Ã
before starting
the wash cycle. To change the program, push Program button again.
P 01 = Short cycle (for light/medium soiled washware)
P 02 = Standard cycle (for medium/heavy soiled washware)
P 03 = Long cycle (for dried on debris and containers)
P 04 = Endless cycle
An endless cycle will be indicated by moving light points at the
temperature indicators.
To stop the wash cycle, push Start button
Á
.
(After 20 minutes, the machine will stop automatically.)
After a short break, rinse starts automatically.
The chosen cycle remains programmed until the machine is
switched off.
Only for machines with switchable washing pressure (optional):
Activation of the high-pressure mode for a running cycle is done by
briefly pressing the blue illuminated Start button (not possible within
the first 5 seconds after cycle start).
By pushing the Start button and holding (3 sec.), the high-pressure
mode is permanently activated until the progam is changed or the
machine is switched off.
At the temperature indicator Rinse
Å
, "HP" appears.
To Next Page
Loading...
