Hobart UX Series - Switch-Off and Cleaning; Machine Switch-Off Procedure; Daily Cleaning Routine; Weekly Cleaning Routine

AG-21213-F-09-09 15
DE
GB
F
NL
8 PREVIEW OF TEMPERATURES
– Press the Program button
Ã
and hold (3 sec.) until the indicators
Wash
Ä
and Rinse
Å
show the actual temperatures (°C).
The indicators go out 10 sec. after releasing Program button.
Permanent temperature display can be activated on request by the
service technician.
9 SWITCH-OFF AND CLEANING THE MACHINE
ATTENTION !
Do not stand on the open front door of the machine.
9.1 SWITCH-OFF
– Close door, push and hold Drain-button
Â
for 2 secs.
NOTE
:
During the drain cycle, the interior of the machine is cleaned
automatically. A final inspection is recommended to remove coarse soil.
When Drain-button goes off:
Switch off main switch or unplug and close shut off valve at site!
9.2 CLEANING (DAILY)
To clean the machine do not use any chloric, acidic or
abrasive products and no metallic brushs.
– Open the door, take out and clean strainers.
– Clean interior of the machine.
– Put strainers back into place.
– Leave the door open for ventilation.
9.3 CLEANING (WEEKLY)
– Take out wash and rinse arms.
Use the strainer as a spanner to loosen the hexagon screw (1) by
turning it counter-clockwise (2).
– Open plugs of wash and rinse arms and flush.
– Put all parts back into place.
1
2