Holden Colorado Owner Manual (Holden-Localizing-Australia/New Zealand-
13711071) - 2020 - CRC - 3/4/19
Climate Controls 169
If no cooling or drying is required,
switch the cooling system off to
save fuel.
Automatic Mode AUTO
Basic setting for maximum comfort:
.
Press AUTO button, the air
conditioning is activated
automatically.
.
Open all air vents.
.
Set preselected temperature
turning knob (E).
All air vents are actuated
automatically in automatic mode.
The air vents should therefore
always be open.
The following functions can be
adapted manually, however, the
system will no longer function in
automatic mode.
.
Fan speed (A).
.
Air conditioning (B).
.
Air distribution (C).
.
Demisting and defrosting (D).
.
Air recirculation (H).
.
Power
O (I).
The preselected temperature is
automatically regulated. In the
automatic mode, the fan speed and
air distribution automatically
regulate the air flow.
The system can be manually
adapted by the use of air distribution
and fan speed controls.
Each change of settings is indicated
in the Info-Display.
Activated functions are also
indicated by the LED in the button in
some cases.
The electronic climate control
system is only fully operational
when the engine is running.
Do not cover the sensor on the
instrument panel for correct
operation.
Manual Settings
Climate control system settings can
be changed by activating the
buttons and turning the rotary
knobs. Changing a setting can
deactivate the automatic mode.
To return to automatic mode, press
AUTO button (F).
To Next Page
Loading...
