Holden Colorado Owner Manual (Holden-Localizing-Australia/New Zealand-
13711071) - 2020 - CRC - 3/4/19
Seats and Restraints 39
Warning (Continued)
Do not use a child restraint on the
front passenger’s seat. These
vehicles are NOT fitted with child
restraint anchorage points.
{
Warning
Do not fit a child restraint to a rear
folding jump seat or a seat
without a child restraint
anchorage point.
Note
If unsure about installing a child
restraint, contact an approved
restraint fitting station or a Holden
Dealer.
ISOFIX Child Restraint
Systems
(Crew cab)
Fasten vehicle-approved ISOFIX
child restraint systems to the
ISOFIX mounting brackets.
Note
Ensure that seat belt buckles are
placed out of the way of the
child seat.
ISOFIX mounting brackets are
indicated by a label on the
seatback, as shown. In addition to
the ISOFIX mounting, fasten the
top-tether straps to the top-tether
anchorage points. See Top-Tether
Child Restraint Systems 0 39.
Top-Tether Child
Restraint Systems
(Crew cab)
A. Front of vehicle
The child restraint tether anchors
are located at the rear of the rear
seats in line with the three rear
seating positions.
Note
Use the child restraint anchors for
their designed purpose only.
To Next Page
Loading...
Need help?
General
