Holden Colorado Owner Manual (Holden-Localizing-Australia/New Zealand-
13711071) - 2020 - CRC - 3/4/19
Vehicle Care 231
2. Push the bulb into the socket
slightly, rotate counterclockwise
and remove the bulb.
3. Insert a new bulb into the bulb
holder and refit the holder into
the reflector and rotate
clockwise to engage.
Taillamps
1. Unscrew both fasteners.
2. Remove the tail lamp assembly
by pulling it straight out from
the body. Take care that the
cable duct remains in position.
3. Tail lamp/brake lamp (1)
Turn signal lamp (2)
Reverse lamp (3)
To Next Page
Loading...
