Imager Duo Operator’s Manual
i
Table of Contents
Chapter One
INTRODUCTION
SECTION A:
Overview and Function of the Imager Duo 1.1
SECTION B:
The ThinPrep
®
Imaging System Process 1.4
SECTION C:
Specimen Preparation and Processing 1.6
SECTION D:
Imager Duo Technical Specifications 1.7
SECTION E:
Internal Quality Control 1.16
SECTION F:
Imager Duo Hazards 1.17
SECTION G:
Disposal 1.21
Chapter Two
IMAGER DUO INSTALLATION
SECTION A:
General 2.1
SECTION B:
Action Upon Delivery 2.1
SECTION C:
Preparation Prior to Installation 2.1
SECTION D:
Post Installation Storage and Handling 2.4
Chapter Three
OPERATION OF THE IMAGER DUO
SECTION A:
Chapter Overview 3.1
SECTION B:
Applying Power to the Equipment 3.3
SECTION C:
Materials Required Prior to Operation 3.6
SECTION D:
Slide Labeling 3.7
SECTION E:
Loading Slide Cassettes 3.9
SECTION F:
Load Slide Cassettes into the Imaging Station 3.11
SECTION G:
Slide Processing 3.15
SECTION H:
Completing Slide Processing 3.28
SECTION I:
Shutting Down the Imager Duo 3.29
SECTION J:
Rebooting the System 3.32
To Next Page
Loading...
