INTRODUCTION
Imager Duo Operator’s Manual
1.15
ThinPrep Imaging System Standards
The ThinPrep Imaging System has been tested and certified by a U.S. nationally
recognized testing Laboratory (NRTL) to comply with current Safety, Electro-
Magnetic Interference (EMI) and Electro-Magnetic Compatibility (EMC) stan-
dards. Refer to the product label, located on the rear of the instrument, to see
the safety certification markings.
Do not use this device in close proximity to sources of strong electromagnetic
radiation (e.g., unshielded intentional RF sources), as these may interfere with
the proper operation.
This product is
in vitro
diagnostic (IVD) medical equipment.
This product contains a device classified per EN 60825-1: 1994, Issue 2, June
1997 as a Class 1 LED Product.
This equipment meets the emission and immunity requirements of IEC 61326-2-
6. This equipment has been designed and tested to CISPR 11 Class A. In a
domestic environment it may cause radio interference, in which case, you may
need to take measures to mitigate the interference. The electromagnetic envi-
ronment should be evaluated prior to operation of the equipment.
To Next Page
Loading...
