Rev. 1.60 130 August 20, 2019 Rev. 1.60 131 August 20, 2019
BS66F340/BS66F350/BS66F360/BS66F370
Touch A/D Flash MCU with LED Driver
BS66F340/BS66F350/BS66F360/BS66F370
Touch A/D Flash MCU with LED Driver
Counter Value
CCRP
CCRA
STON
STPAU
STPOL
CCRP Int.
Flag STMPF
CCRA Int.
Flag STMAF
STM O/P Pin
(
STOC=1)
Time
Counter stopped
by CCRA
Pause
Resume
Counter Stops
by software
Counter Reset when
STON returns high
STM [1:0] = 10 ; STIO [1:0] = 11
Pulse Width
set by CCRA
Output Inverts
when STPOL = 1
No CCRP Interrupts
generated
STM O/P Pin
(
STOC=0)
STCK pin
Software
Trigger
Cleared by
CCRA match
STCK pin
Trigger
Auto. set by
STCK pin
Software
Trigger
Software
Clear
Software
Trigger
Software
Trigger
Single Pulse Mode
Note: 1. Counter stopped by CCRA
2. CCRP is not used
3. The pulse triggered by the STCK pin or by setting the STON bit high
4. A STCK pin active edge will automatically set the STON bit high.
5. In the Single Pulse Mode, STIO [1:0] must be set to "11" and can not be changed.
To Next Page
Loading...