Honda BF15D - Page 308

BF15DoBFZOD
Power Tilt Does Not Hold
~ Check the m-1
Loose
-1 Tighten the manual valve securely.
I
Tight
7
Check for oil leakage from each mating
1
Not leaking
.1
Check the oil level with the piston rod
fully extended
(P. 12-39).
~
i
Normal
1 Check the blow pressure (P. 12-39).
Normal
1 Check for air in the system.
I-
No air
+
Faulty power tilt assembly.
Check and repair the power tilt
assembly according to the table on
page
2-5.
Leaking -
Replace the O-ring and/or oil seal at
the leaking point (Section 12).
Low
-1 Fill with recommended oil (P. 12-39). 1
Replace the power tilt motor oil seal (P.
Abnormal -1 12-36).
Air
*
Bleed air and recheck:
Loosen the manual valve and move
the piston rod back and forth several
times, then tighten the manual valve.
213