N3680 Decoded Engine User Guide 131
E - Edge Sharpen
An edge sharpen filter cleans up the edges of an image, making it look cleaner and
sharper. While edge sharpening does make the image look cleaner, it also removes
some fine detail from the original image. The strength of the edge sharpen filter
can be entered from 1 to 24. Entering a 23E gives the sharpest edges, but also
increases noise in the image.
Example:
F - File Format
Indicates the desired format for the image.
1D 1 bit per pixel, black and white image
0E Don’t sharpen image (default)
14E Apply edge sharpen for typical image
ne Apply edge sharpen using strength n (n = 1-24)
Edge Sharpen at 0E: Edge Sharpen at 24E:
0F KIM format
1F TIFF binary
2F TIFF binary group 4, compressed
3F TIFF grayscale
4F Uncompressed binary (upper left to lower right, 1 pixel/bit, 0 padded end of line)
5F Uncompressed grayscale (upper left to lower right, bitmap format)
6F JPEG image (default)
8F BMP format (lower right to upper left, uncompressed)
15F BMP Uncompressed raw image
To Next Page
Loading...
