Honeywell CF3680 - Show Software Revision; Show Data Format; Test Menu; Ezconfig Cloud Introduction

140 N3680 Decoded Engine User Guide
Show Software Revision
Scan the bar code below to output the current software revision, unit serial number,
and other product information for both the scan engine and base.
Show Data Format
Scan the bar code below to show current data format settings.
Test Menu
When you scan the Test Menu On code, then scan a programming code in this
manual, the scan engine displays the content of a programming code. The pro-
gramming function will still occur, but in addition, the content of that program-
ming code is output to the terminal.
Note: This feature should not be used during normal scan engine operation.
EZConfig Cloud Introduction
EZConfig Cloud provides a wide range of PC-based programming functions that
can be performed on a scan engine connected to your PC's COM port. EZConfig
Cloud allows you to download upgrades to the scan engine's firmware, change pro-
grammed parameters, and create and print programming bar codes. Using EZCon-
fig Cloud, you can even save/open the programming parameters for a scan engine.
This saved file can be e-mailed or, if required, you can create a single bar code that
Show Software Revision
Data Format Settings
DFMBK3?.
On
* Off