Honeywell CF3680 - Honeywell Bioptic Aux Port Configuration; Datalogic Magellan © Aux Port Configuration; NCR Bioptic Aux Port Configuration

10 N3680 Decoded Engine User Guide
Honeywell Bioptic Aux Port Configuration
Scan the following Plug and Play code to program the scan engine for a Honeywell
bioptic scanner auxiliary port configuration. This bar code sets the baud rate to
38400 bps and the data format to 8 data bits, no parity, 1 stop bit.
Datalogic™ Magellan
©
Aux Port Configuration
Scan the following Plug and Play code to program the scan engine for a Datalogic
Magellan auxiliary port configuration. This bar code sets the baud rate to 9600 bps
and the data format to 8 data bits, no parity, 1 stop bit.
NCR Bioptic Aux Port Configuration
Scan the following Plug and Play code to program the scan engine for an NCR
bioptic scanner auxiliary port configuration. The following prefixes are pro-
grammed for each symbology:
Honeywell Bioptic Settings
Datalogic Magellan Bioptic Settings
Symbology Prefix Symbology Prefix
UPC-A A Interleaved 2 of 5 b
UPC-E E0 Code 128 f
EAN-8 FF GS1 DataBar
Omnidirectional
r
EAN-13 F GS1 DataBar
Expanded
r
Code 39 a Codabar N
Code 32
Pharmaceutical
(PARAF)
a
NCR Bioptic Settings