N3680 Decoded Engine User Guide 63
Other Programming Selections
• Clear One Data Format
This deletes one data format for one symbology. If you are clearing the primary
format, scan 0 from the Programming Chart inside the back cover of this
manual. If you are clearing an alternate format, scan 1, 2, or 3, depending on the
format you are clearing. Scan the Terminal Type and Code I.D. (see Symbology
Charts on page 171), and the bar code data length for the specific data format
that you want to delete. All other formats remain unaffected.
• Clear all Data Formats
This clears all data formats.
• Save to exit and save your data format changes.
• Discard to exit without saving any data format changes.
To Next Page
Loading...
