N3680 Decoded Engine User Guide 41
CodeGate
®
When CodeGate is On, the trigger is used to allow decoded data to be transmitted
to the host system. The scanner remains on, scanning and decoding bar codes, but
the bar code data is not transmitted until the trigger is pressed. When CodeGate is
Off, bar code data is transmitted when it is decoded. Default = CodeGate Off Out-of-
Stand.
Mobile Phone Read Mode
When this mode is selected, your scanner is optimized to read bar codes from
mobile phone or other LED displays. However, the speed of scanning printed bar
codes may be slightly lower when this mode is enabled.
Note: Presentation scanning is not recommended to be used with the CF3680.
Note: To turn off Mobile Phone Read Mode, scan a Manual or Serial Trigger Mode bar code
(see page 34).
* CodeGate Off
Out-of-Stand
Hand Held Scanning - Mobile
Phone
Presentation Scanning -
Mobile Phone
To Next Page
Loading...
