Honeywell CF3680 - Page 168

152 N3680 Decoded Engine User Guide
8 Data, 1 Stop, Parity Mark 25
RS232 Receiver Time-out Range 0 - 300 seconds 232LPT### 25
RS232 Handshaking *RTS/CTS Off 232CTS0 26
Flow Control, No Timeout 232CTS1 26
Two-Direction Flow Control 232CTS2 26
Flow Control with Timeout 232CTS3 26
RS232 Timeout 232DEL#### 26
*XON/XOFF Off 232XON0 27
XON/XOFF On 232XON1 26
*ACK/NAK Off 232ACK0 27
ACK/NAK On 232ACK1 27
RS232 Stop Mode RS232 Stop Mode On 232SDY 27
Scanner-Bioptic Packet Mode *Packet Mode Off 232PKT0 28
Packet Mode On 232PKT2 28
Scanner-Bioptic ACK/NAK Mode *Bioptic ACK/NAK Off 232NAK0 28
Bioptic ACK/NAK On 232NAK1 28
Scanner-Bioptic ACK/NAK Timeout ACK/NAK Timeout (*5100) 232DLK##### 28
Input/Output Selections
Power Up Beeper Power Up Beeper Off - Scanner BEPPWR0 29
*Power Up Beeper On - Scanner BEPPWR1 29
Beep on BEL Character Beep on BEL On BELBEP1 29
*Beep on BEL Off BELBEP0 29
Trigger Click On BEPTRG1 30
*Off BEPTRG0 30
Beeper - Good Read Off BEPBEP0 30
*On BEPBEP1 30
Beeper Volume - Good Read Off BEPLVL0 30
Low BEPLVL1 30
Medium BEPLVL2 30
*High BEPLVL3 30
Beeper Pitch - Good Read (Frequency) Low (1600) (min 400Hz) BEPFQ11600 31
*Medium (2400) BEPFQ12400 31
High (4200) (max 9000Hz) BEPFQ14200 31
Beeper Pitch - Error (Frequency) *Razz (250) (min 200Hz) BEPFQ2800 31
Medium (3250) BEPFQ23250 31
High (4200) (max 9000Hz) BEPFQ24200 31
Selection
Setting
* Indicates default
Serial Command
# Indicates a
numeric entry
Page