Honeywell CF3680 - Page 177

N3680 Decoded Engine User Guide 161
MSI Check Character *Validate Type 10, but Don’t Transmit MSICHK0 103
Validate Type 10 and Transmit MSICHK1 103
Validate 2 Type 10 Chars, but Don’t
Transmit
MSICHK2 103
Validate 2 Type 10 Chars and Transmit MSICHK3 103
Validate Type 11 then Type 10 Char, but
Don’t Transmit
MSICHK4 103
Validate Type 11 then Type 10 Char and
Transmit
MSICHK5 103
Disable MSI Check Characters MSICHK6 103
MSI Message Length Minimum (4 - 48) *4 MSIMIN## 103
Maximum (4 - 48) *48 MSIMAX## 103
GS1 DataBar Omnidirectional Default All
GS1 DataBar Omnidirectional Settings
RSSDFT 104
Off RSSENA0 104
*On RSSENA1 104
GS1 DataBar Limited Default All GS1 DataBar Limited
Settings
RSLDFT 104
Off RSLENA0 104
*On RSLENA1 104
GS1 DataBar Expanded Default All GS1 DataBar Expanded
Settings
RSEDFT 104
Off RSEENA0 105
*On RSEENA1 105
GS1 DataBar Expanded Msg. Length Minimum (4 - 74) *4 RSEMIN## 105
Maximum (4 - 74) *74 RSEMAX## 105
Codablock A Default All Codablock A Settings CBADFT 105
*Off CBAENA0 105
On CBAENA1 105
Codablock A Msg. Length Minimum (1 - 600) *1 CBAMIN#### 106
Maximum (1 - 600) *600 CBAMAX#### 106
Codablock F Default All Codablock F Settings CBFDFT 106
*Off CBFENA0 106
On CBFENA1 106
Codablock F Msg. Length Minimum (1 - 2048) *1 CBFMIN#### 106
Maximum (1 - 2048) *2048 CBFMAX#### 106
PDF417 Default All PDF417 Settings PDFDFT 107
*On PDFENA1 107
Off PDFENA0 107
Selection
Setting
* Indicates default
Serial Command
# Indicates a
numeric entry
Page