CGW-MB Installation and Users’ Manual | P/N:LS10248-000HW-E | REV.G | JUL/31/2022 160
Gamewell-FCI Panels Connecting to the Panels
• Connect the RxD wire to the TB6-4 pin.
Power Connection
On the CLSS Gateway mainboard Side
Ensure that the power cable is connected with the power port of the CLSS Gateway
mainboard.
The power port is labeled as 7 in the Figure C.15.
On the Panel Side
• Connect the Red wire to the +ve pin in the TB3 port.
• Connect the Black wire to the -ve pin in the TB3 port.
Figure C.16: E3 Panel: CLSS Gateway mainboard Connections
To Next Page
Loading...
