EasyManuals Logo

Honeywell E-Mon EM3S-V-P-R User Manual

Honeywell E-Mon EM3S-V-P-R
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #81 background imageLoading...
Page #81 background image
Troubleshooting
E-Mon® Series - Global User Manual
54-000-01-ENG01-0121
Page | 81
Is it available with communication?
Our next release in 2021 will include serial communication RS485. Currently the 6-
pin port only includes 2 separate configurable Pulse outputs. For more details, refer
section Pulse Meter Configuration.
Do I need an Android phone/tablet to be able to use my Class 6200 meter?
No, all key functions of the meters are available via the menu on the display, such as
the Parameter selection, Wiring check, Monitoring values, etc.
The current app is only available on Android and brings additional help during
commissioning (and readouts), but we are planning to release an iOS version soon.
Also, for advanced functions and readouts, navigation on smartphone or tablets is
faster than on meter display.
How should I wire the ground on the different enclosures?
Only the J-steel enclosure must be grounded, as specified on related document:
Installation Instructions for standalone enclosures (page 4).
Note: All enclosures are UL61010 listed.
What is the function of the red button on lower right side of the meter front panel?
This is the sealing button which allows to lock all parameters related to sub billing after
commissioning.
Can I mix legacy E-Mon meters and Class 6200 meters in the same MMU cabinets?
No, new and improved MMU cabinets have been designed for Class 6200.
Please note that DIN kit accessories are available for mounting Class6200 in third
party cabinets (SKU: EM3S-P-V-M, including the DIN meter and the mounting kit).
How is the accuracy certified on Class6200?
E-Mon Class 6200 is a revenue grade meter with ANSI C12.20 certificate (Class 0.5),
like our legacy E-Mon bestsellers.
Do I need to set the Pulse parameters during commissioning?
Default values: 30ms duration and 1kWh Pulse ratio should match typical applications
Be careful: these default values are DIFFERENT from legacy Class 2000.
For higher CS ratio settings, we provide a table to explain how Pulse parameters should
be changed in the Setup Parameters menu on the display or via the app

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell E-Mon EM3S-V-P-R and is the answer not in the manual?

Honeywell E-Mon EM3S-V-P-R Specifications

General IconGeneral
BrandHoneywell
ModelE-Mon EM3S-V-P-R
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals