Honeywell E-Mon EM3S-V-P-R User Manual

E-Mon® Series Global User Manual
Troubleshooting
Page | 78
54-000-01-ENG01-0121
10. Troubleshooting
The meters are practically maintenance free as it doesn’t contain any user-serviceable or
replaceable parts. Therefore, the meter does not require any special maintenance schedule.
However, in case of any malfunctioning or suspicion of glitches, kindly refer to the following
troubleshooting methods.
Kindly follow the safety instructions and take necessary precautions before analyzing or
troubleshooting the energy meter.
10.1. Troubleshooting Guide
Problem Statement
Action
Front panel display is not
working.
Switch the meter off and on again to check the front
panel display.
Up/down/SET buttons are not
responding.
Mobile Device Pairing issue/
Device not discoverable/
Mobile pairing Failed
1. Check if the Bluetooth on your smart-phone device is
On or discoverable.
2. Check if the Bluetooth on your meter is On or
discoverable.
3. Check if the device is within Bluetooth range.
4. Disconnect the paired device completely.
5. Switch the meter off and on again to check the front
panel display.
6. Switch the Bluetooth of your mobile device on.
7. Use the discovery mode by tapping on the Up/down
button.
8. Check if the correct meter serial number from the list
is selected.
9. Ensure the app is updated with latest version.
10. Ensure the firmware is updated.
11. Tap on the meter serial number from the list if
available. If not, use the pair button to search for
available meters.
IMPORTANT!
To avoid risk of meter damage, do not open the meter case and/or attempt to repair the
meter.

Honeywell E-Mon EM3S-V-P-R Specifications

General

Brand	Honeywell
Model	E-Mon EM3S-V-P-R
Category	Measuring Instruments
Language	English