Honeywell E-Mon EM3S-V-P-R User Manual

E-Mon® Series Global User Manual
Front Panel Display & Navigation
Page | 50
54-000-01-ENG01-0121
4.4.3. Setup Menu
The setup menu options allow users to perform system settings for meter operation. Press
SET to view the main menu items and use the Up/Down Navigation buttons to highlight
Setup. Press the SET button to enter Setup menu options.
1. Reset Registers – Use this menu options to reset system values. This submenu options
are used for partial reset, peak reset and resetting Max, Min and Average values. Navigate
to the list items to reset the Partial, Max/Min/Average and peak kW through front panel of
the meter from setup menu. Refer to Figure 15.
▪ Use the setup menu for reset:
1. Use the navigation method to enter the Setup menu.
2. Go to the menu and press SET to check the options.
3. Navigate to the ‘Reset Register’ option and press SET to visit ‘Reset’ options.
4. Highlight an option from ‘Reset Partial Register’, ‘Reset Max/Min/Average’, and
‘Reset Peak’ using the up/down buttons.
5. Select an option by pressing SET button to reset.
6. Long press the SET button to go back to the main screen.

Honeywell E-Mon EM3S-V-P-R Specifications

General

Brand	Honeywell
Model	E-Mon EM3S-V-P-R
Category	Measuring Instruments
Language	English