Honeywell Farenhyt IFP-75HV - 2: Moving through the Menus; 3: Selecting Options and Entering Data; Programming Menu Quick Reference

70 IFP-75 Series Manual — P/N LS10147-001SK-E:E 4/6/2022
Programming Overview Programming Menu Quick Reference
7.4.2 Moving through the Menus
The first line of the display identifies the menu. The option available for editing displays next to the equal sign. Press the ENTER/ACK key
to select the desired option. Arrows on the LCD indicate there are more options available. Access these screens by pressing the down arrow
key. When the equal sign reaches the last item displayed on the screen, the screen will scroll down. Likewise, when the equal sign reaches
the first item on the screen, the screen will scroll up.
Figure 7.7 shows how to move through Menu screens, using the System Tests screen as an example.
7.4.3 Selecting Options and Entering Data
There are several ways to make programming selections using the control panel depending on which screen you are currently using. The
chart below is a generic explanation.
7.5 Programming Menu Quick Reference
This section of the manual lists all Program Menu options in the order they appear on the sub-menus. The default settings are indicated in
text or marked with an asterisk. The Comments column includes the information and a reference to a section (if applicable) which has more
detailed information.
Main Menu
1=System Tests
2 Point Functions
3 Event History
Menu Name
selected option
(displays next to
equal sign)
Arrow indicates more screens.
Press the down arrow key to access.
Figure 7.7 Moving Through the Program Menu
To: Press
Select from a Menu:
Enter the number of the option.
Enter the numeric data: Press the appropriate number on the annunciator.
Enter the text (alphanumeric data): Use the Up and Down arrow keys to enter each character individually until the one you want to select
displays. Then, press the right arrow to select the character.
Select from a scrolling list: Use the up and down arrow to move through a list of available options. When the option you want to
select is displayed, press ENTER.
Table 7.3 Selecting the Options
Menu Options/Defaults Reference
Module
Edit Module Select Module
Edit Module ID
Section 8.2.1Enter Module Name
Edit Module specific options
Add Module
5824 Printer Module
Section 8.2.2
RA-2000 LCD
Annunciator
RA-1000 LCD
Annunciator
RA-100 LCD
Annunciator
RPS-1000 Power
Supply
5496 NAC Expander
5880 LED I/O
Module
5865 LED
Annunciator Module
SK-NIC Network
Interface Card
Delete Module Select Module Section 8.2.3
View Module List Select Module Section 8.2.4
Table 7.4 Programming Quick Reference List