Honeywell Galaxy Dimension series Integration Guide

Supported Honeywell Galaxy devices
gtap.genetec.com | Honeywell Galaxy Control Panel Integration Guide 5.2 8
EN.550.007-V5.2.C4(3) | Last updated: March 11, 2014
Supported Honeywell Galaxy devices
Security Center 5.2 SR4 supports the following Honeywell Galaxy Dimension control panel
devices. For each device, the corresponding firmware and certification status is listed.
57517 Clicking the buttons on the intrusion detection area widget may have no effect,
depending on your control panel input configuration. For more information about
configuring input functions, see the Honeywell Galaxy Dimension Installer Manual.
57921 The “Intrusion detection area input trouble” event does not report which input
triggered the event.
82756 Some intrusion detection events are not supported in Security Center 5.2. A list of
supported events will be available soon, please check the latest version of the Honeywell
Galaxy Control Panel Integration Guide.
Limitation Description
Model Device Firmware Certification
A234 RS-232 Lead Kit Certified
C072 Rio Expander module Certified
CP037 Keypad Certified
E080-2 Galaxy Ethernet Module Version 2.11
IMPORTANT This module
ships with 2.08. A firmware
upgrade is needed. Contact
Honeywell to receive version
2.11 on an SPI-key.
Certified
E080-4 Galaxy Ethernet Module Version 3.02 Certified
GD-48 Control panel Version 6.7 and later Certified
GD-96 Control panel Version 6.7 and later Supported by design
GD-264 Control panel Version 6.7 and later Supported by design
GD-520 Control panel Version 6.7 and later Certified

Honeywell Galaxy Dimension series Specifications

General

Model	Galaxy Dimension series
Users	Up to 250
Partitions	Up to 8
Operating Temperature	-10°C to +55°C
Compatibility	Honeywell Galaxy accessories and peripherals