Honeywell Galaxy Dimension series Integration Guide

Configuring the intrusion detection unit
gtap.genetec.com | Honeywell Galaxy Control Panel Integration Guide 5.2 23
EN.550.007-V5.2.C4(3) | Last updated: March 11, 2014
Configuring the intrusion detection unit
To receive intrusion events and alarms from the Galaxy Dimension control panel in Security
Desk, you need to configure the intrusion detection unit (panel) in Config Tool.
This section includes the following topics:
• "Configure intrusion detection unit properties" on page 24
• "Map inputs to intrusion detection areas" on page 27
• "Set the time zone" on page 29
• "Create custom event mappings" on page 30
• "Configuring the heartbeat connection" on page 30

Honeywell Galaxy Dimension series Specifications

General

Model	Galaxy Dimension series
Users	Up to 250
Partitions	Up to 8
Operating Temperature	-10°C to +55°C
Compatibility	Honeywell Galaxy accessories and peripherals