Honeywell Galaxy Dimension series Integration Guide

Configuration overview
gtap.genetec.com | Honeywell Galaxy Control Panel Integration Guide 5.2 14
EN.550.007-V5.2.C4(3) | Last updated: March 11, 2014
Configuration overview
The following table summarizes the installation and configuration process for the Galaxy
Dimension integration.
Phase Description See
1
Before you start configuring Security Center intrusion entities,
you should understand the relationship between Honeywell
Galaxy terms and Security Center entities, and read the
information about this release.
"How Honeywell Galaxy terminology is
used in Security Center" on page 4 and
"Release Notes" on page 5.
2
Configure the inputs, outputs, and groups on your Galaxy
Dimension panel.
See the Honeywell Galaxy Dimension
Installer Manual.
3
Enable communications between Security Center server and the
control panel, using IP or RS-232 communication.
• "Configure the control panel for RS-
232 communication" on page 15.
• "Configure the control panel for IP
communication" on page 17
4
Create the Intrusion Manager role in Security Center to manage
the intrusion detection unit.
"Create the Intrusion Manager role" on
page 19.
5
Create the Galaxy Dimension control panel as an intrusion
detection unit in Security Center.
"Create the Intrusion detection unit" on
page 21.
6
Configure the intrusion detection unit basic properties (for
example, activating the inputs, outputs, and intrusion detection
areas to monitor).
"Configure intrusion detection unit
properties" on page 24.
7
Map inputs to intrusion detection areas so events received from
the control panel are associated to specific areas.
"Map inputs to intrusion detection
areas" on page 27.
8
(Optional) Set the time zone for the intrusion detection unit. "Set the time zone" on page 29.
9
(Optional) Create custom events for the control panel that can be
received in Security Center.
"Create custom event mappings" on
page 30.
10
(Optional) Configure the heartbeat connection if you want to
monitor the communication between Security Center server and
the control panel.
"Configuring the heartbeat connection"
on page 30.
11
(Optional) Map intrusion detection areas to cameras to view
video associated to intrusion events in Security Desk.
"Map intrusion detection areas to
cameras" on page 33
12
(Optional) Create events-to-actions, for Galaxy Dimension
control panel events received in Security Center to trigger
actions.
"Map Galaxy panel events to Security
Center actions" on page 34.

Honeywell Galaxy Dimension series Specifications

General

Model	Galaxy Dimension series
Users	Up to 250
Partitions	Up to 8
Operating Temperature	-10°C to +55°C
Compatibility	Honeywell Galaxy accessories and peripherals