Honeywell Galaxy Dimension series Integration Guide

How Honeywell Galaxy terminology is used in Security Center
gtap.genetec.com | Honeywell Galaxy Control Panel Integration Guide 5.2 4
EN.550.007-V5.2.C4(3) | Last updated: March 11, 2014
How Honeywell Galaxy terminology is used in Security
Center
Honeywell Galaxy intrusion detection components are mapped as entity types in Security
Center. The following table lists some Honeywell Galaxy components and terms, and how they
are represented in Security Center.
Honeywell term Description Security Center term
Galaxy Dimension
control panel
The control panel that is monitored and
controlled by Security Center. Each control
panel can control multiple groups.
Intrusion detection unit
Group A group of zones configured on the control
panel that specify a physical area, such as a
floor of a building. These groups can be
monitored and armed in Security Desk.
Intrusion detection area
Zone Inputs for devices such as glass break detectors,
motion sensors, temperature sensors, etc., that
are connected to the control panel.
input
Zone function The zone’s function, such as monitoring
intruders, fire, AC fail, entry, exit, and so on.
The zone function is configured on the control
panel.
Input function
Output Output pin connected to the control panel. Output
Full set This action arms a whole group. Master arm
Part set This action arms the zones in a group that have
the Part attribute enabled (usually the
perimeter inputs of a group).
Perimeter arm
omit zone This option temporarily removes a zone from
the system so it will not generate alarms.
bypass input

Honeywell Galaxy Dimension series Specifications

General

Model	Galaxy Dimension series
Users	Up to 250
Partitions	Up to 8
Operating Temperature	-10°C to +55°C
Compatibility	Honeywell Galaxy accessories and peripherals